Skip to content

How To Use Concrete Deck Blocks

Concrete deck blocks are a type of foundation that can be used to support decks, porches, and other structures. They are made of concrete and are very sturdy. In order to use them, you must first excavate the area where you will be placing them. Next, you will need to level the ground and install piers or posts if necessary. Then, you can place the blocks on the piers or posts and fill them with concrete. Finally, you can build your deck

How To Use Concrete Deck Blocks

Cutting the blocks to the correct shape and size can be a bit tricky, but the finished product will be worth it. Nailing or screwing them together using a sturdy construction adhesive is usually a good idea.

-Concrete deck blocks -Cement -Sand -Paint or a sealant -Safety glasses

  • Lay out the desired area for your deck
  • Put the concrete deck blocks in the
  • Dig holes for the deck blocks, making sure they are level
  • Decide how many concrete deck blocks you will need and mark the spots

-The type of concrete deck block you choose will affect the overall look and function of your deck. -There are a few different types of concrete deck block, each with its own advantages and disadvantages. -Some of the most popular types of concrete deck block include: plain blocks, stamped blocks, and textured blocks. -plain blocks are the simplest type of block, and are made up of a single layer of concrete. –

Frequently Asked Questions

How Far Apart Do Concrete Deck Blocks Need To Be?

When building a concrete deck, the blocks should be spaced at least 12 inches apart.

How Much Weight Can A Concrete Deck Block Hold?

A concrete deck block can hold up to 1,000 pounds.

Can You Build A Deck Using Concrete Blocks?

Building a deck using concrete blocks is possible, but it will require some skill and patience. First, you will need to measure the space that you want to build your deck in and estimate the size of the concrete blocks that you will need. Then, you will need to find a supplier who sells concrete blocks in bulk, and order as many blocks as you estimate will be necessary. Once you have your blocks, it is time to start construction. You will first need to mortar the blocks together using a sealer, then paint or stain the deck as desired. Finally, install railings or other features as desired.

How Much Space Do You Need Between Concrete Deck Blocks?

Typically, you need at least twice the space between concrete deck blocks as you do between the blocks themselves. For example, if you have a 2-by-4-foot block, you would need at least 4 feet between the blocks.

Are Concrete Deck Blocks Good?

Concrete deck blocks are a popular way to add a concrete accent to a deck. They are available in different colors and styles, so they can be matched with any deck design.

How Many Deck Blocks Do I Need For A 10X12 Shed?

The answer to this question depends on the shed’s dimensions.

How Much Space Do You Need Between Pier Blocks?

Pier blocks should be spaced at least six feet apart, but eight to ten feet is better.

Will Deck Blocks Sink?

When installed on a concrete slab, deck blocks will typically not sink below the slab’s surface. However, if the deck block is installed over a layer of gravel or earth, it may be possible for the deck block to settle and form a depression below the slab’s surface. If this occurs, it is important to check the deck block regularly for settlement and make any necessary repairs as needed.

What Strength Are Concrete Blocks?

The strength of concrete blocks is determined by the type of concrete used, the mix ratio, and the weight of the blocks.

Are Concrete Blocks Load-Bearing?

A concrete block is not load-bearing.

How Many Blocks Do I Need Calculator?

You will need to know how many blocks you need to create a level in order to progress.

How Far Apart Should Piers Be?

There is no definitive answer to this question as pier spacing will vary depending on the configuration and desired performance of the pier. Generally, piers should be spaced at least twice the width of the vessel in order to provide a sufficient margin of safety.

How Many Piers Do I Need For Foundation?

There is no definitive answer to this question as it depends on a number of factors, such as the width of your pier and the type of foundation you are using. A rule of thumb is that you will need at least two piers to support a foot or two of foundation, but more may be necessary depending on your specific situation.


Concrete deck blocks are a convenient and cost-effective way to secure a concrete surface. They can be used to create walkways, patios, and other ground level surfaces.

Leave a Reply

Your email address will not be published. Required fields are marked *