Skip to content

How To Use Sewer Rod

Sewer rods are used to clear blockages in sewers. They are inserted into the sewer and then rotated to break up the blockage.

How To Use Sewer Rod

Sewer rods are used to clear blockages from sewers. They are inserted into the sewer and pushed or pulled until the blockage is cleared.

– Sewer Rod – Gloves – Goggles – Bucket – Water

  • Push and twist sewer rod up and down until clog is dislodged
  • Place sewer rod into designated sewer opening

-To use a sewer rod, insert the end of the rod into the opening at the top of the sewer pipe. Push and twist the rod until it reaches the clog. Use a back-and-forth motion to dislodge the clog. If necessary, use a plunger to help break up the clog.


Frequently Asked Questions

How Do You Use A Flat Sewer Rod On A Toilet?

The flat sewer rod is inserted into the toilet bowl and pushed down the drain. The rod is then rotated to help break up any clogs.

How Do You Use A Simple Drain Auger?

A drain auger, or snake, is a tool used to clear blockages in plumbing by removing the clog with a rotating helical steel cable. The user inserts the cable into the pipe and turns the crank to push and pull the cable through the pipe.

How Do You Use A Drain Auger On A Floor Drain?

A drain auger is inserted into a floor drain to clear clogs. The auger is rotated to break up the clog and remove it from the drain.

How Do You Use A Drain Rod Plunger?

A drain rod plunger is inserted into the drain and the handle is pumped up and down. This creates a suction that pulls the clog out of the drain.

How Do You Use A Shower Drain Auger?

A shower drain auger – also called a snake – is a tool that can be used to clear clogs from drainage pipes. The auger is inserted into the pipe and rotated to break up the clog.

How Do You Use A Flat Drain Auger?

A flat drain auger is inserted into a clogged drain and twisted to push the clog out.


To Summarize

Sewer rods can be inserted into a clogged sewer line to remove debris and other obstructions. The rods are typically attached to a cable that is operated by a machine, and the operator can use the machine to push and pull the rods through the sewer line. This method can be effective in removing large obstructions, but it may not be suitable for smaller pieces of debris.

Leave a Reply

Your email address will not be published.